Getting Started

To get started (with pre-installed WLED firmware):

  1. Plug a DC adapter compatible with your LED strip (make sure it's the right voltage) into the DC jack on the LIT Tinker.
  2. Connect the male end of your LED strip to the female connector on the LIT Tinker.
  3. Search for the network WLED-AP and connect, the password is wled1234.
  4. Open a webpage and navigate to 4.3.2.1 and follow the instructions :)
  5. Alternatively, you can control the LED strip with WLED's mobile app (iOS, Android).